- Title
- Cu
x S films as photoelectrodes for visible-light water splitting - Creator
- Oppong-Antwi, Louis; Gunawan, Denny; Toe, Cui Ying; Yao, Yin; Valanoor, Nagarajan; Hart, Judy N.
- Relation
- Materials Science in Semiconductor Processing: functional materials for (opto)electronics, sensors, detectors, biotechnology, and green energy Vol. 184, Issue December 2024, no. 108833
- Publisher Link
- http://dx.doi.org/10.1016/j.mssp.2024.108833
- Publisher
- Elsevier
- Resource Type
- journal article
- Date
- 2024
- Description
- Copper sulfides are appealing semiconductors for optoelectronics applications requiring visible-light activity, such as solar water splitting, due to their relatively low band gaps and earth-abundance. This study investigates the effect of deposition conditions, including substrate temperature and background gas pressure, on the characteristics and photoelectrochemical performance of copper sulfide (CuxS) films grown by pulsed laser deposition (PLD) on Si (100) substrates. The results reveal that varying the deposition parameters influences the crystalline phases, morphology, and optoelectronic properties of the films. For deposition at room temperature, the films exhibited covellite CuS phase, while elevated deposition temperatures (250 °C and 500 °C) led to the formation of Cu1.8S and Cu2S phases, resulting in narrowing of the band gap, with the increased temperature also enhancing the film crystallinity and surface roughness. As a result of the changes in film morphology and crystal structure, photocurrent density magnitudes increased with higher deposition temperatures, reaching 0.747 mA/cm2 at −0.8 V for films deposited at 500 °C under vacuum, at least an order of magnitude higher than reported in comparable previous studies of the photoelectrochemical performance of CuxS. Background gas pressure only slightly affected the photocurrent density, with changes in photoactivity also correlating with changes in film roughness and band gap. The results demonstrate the good visible-light activity and behavior of CuxS as a stand-alone photoelectrode material, with tunability based on the fabrication conditions, suggesting their potential use in photoelectrochemical and other solar energy conversion applications.
- Subject
- semiconductor; copper sulfide; photoelectrode; band gap; thin films; SDG 7
- Identifier
- http://hdl.handle.net/1959.13/1518269
- Identifier
- uon:57265
- Identifier
- ISSN:1369-8001
- Rights
- © 2024 The Authors. Published by Elsevier Ltd. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/).
- Language
- eng
- Full Text
- Reviewed
- Hits: 137
- Visitors: 154
- Downloads: 17
| Thumbnail | File | Description | Size | Format | |||
|---|---|---|---|---|---|---|---|
| View Details Download | ATTACHMENT01 | Publisher version (open access) | 7 MB | Adobe Acrobat PDF | View Details Download |